Gateway v1 Reference Manual

Datasheets for Gateway v1

Explains how to power and interface Sensor Seals Gateways with other hardware.

Describes the process of configuring Sensor Seal Gateways via the Sensor Seal Gateway Shell that can be accessed from the Gateway Manager when the gateway is connected to the internet.

The Sensor Seal Gateway Shell (SSGSH) can be accessed from the Gateway Manager and is used to remotely set the configuration of a gateway. This page contains usage information about all the available SSGSH commands.

The gateway can communicate with Sensor Seals in two distinct modes. You can select the appropriate mode for your sensors using the sensormode command.